An energy pyramid is shown below.
secondary
consumers
tertiary
consumers
primary
consumers
producers
What does the energy pyramid demonstrate?
OA. A great amount of energy is gained moving up the energy pyramid.
OB. Energy is not transferred between organisms in an ecosystem.
OC. The same amount of energy is available at every level of the energy pyramid.
OD. A great amount of energy is lost traveling up the energy pyramid.
The energy pyramid demonstrate a great amount of energy is lost traveling up the energy pyramid.
The energy pyramid demonstrates that as you move up from the producers (bottom level), which convert sunlight into energy through photosynthesis, to the primary consumers (herbivores), to the secondary consumers (carnivores that eat herbivores), and finally to the tertiary consumers (carnivores that eat other carnivores), there is a decrease in available energy.
This is because energy is lost at each level through processes such as respiration, heat loss, and waste. Therefore, the top predators of an ecosystem have access to the least amount of energy.
Learn more about energy pyramid:
https://brainly.com/question/2837831
#SPJ1
Submission 3 Capstone Project: How can you make your community more environmentally sustainable? Below are 3 Crosscutting Concepts. Select two and provide an explanation for how your investigation/”research” on energy usage in the home addresses them.
1.Crosscutting Concepts Patterns: Observed patterns in nature guide organization and classification and prompt questions about relationships and causes underlying them. Explanation
2. Cause and Effect: Claim uses empirical evidence to differentiate between cause and correlation, and supports specific cause and effect relationships. Explanation
3.Explanation Stability and Change: Analysis and explanation of geoscience data and global climate models show that a change in one Earth system can result in feedbacks (negative or positive) that can stabilize or destabilize a system. Explanation
Crosscutting Concept: Patterns
Patterns observed in the natural world facilitate organization and classification, as well as raise inquiries about the underlying relationships and causes.
During my exploration of energy usage in residential settings, I discerned several discernible patterns. For instance, a prominent pattern emerged, indicating that the bulk of energy consumption in homes pertains to heating and cooling, followed by lighting and appliances. Moreover, I discovered that energy usage displays notable variations based on factors such as dwelling size, number of occupants, and climatic conditions.
These identifiable patterns enable us to comprehend the factors influencing energy consumption and identify avenues for conservation. By acknowledging that heating and cooling dominate energy use, we can channel our efforts towards enhancing the efficiency of these systems.
Patterns Cause and Effect?Utilizing empirical evidence, claims can differentiate between causal relationships and mere correlations, thus supporting the establishment of specific cause and effect linkages.
During my investigation into energy usage in residential environments, I employed empirical evidence to unveil distinct cause and effect associations. For instance, I observed a positive correlation between energy consumption and dwelling size. This relationship can be attributed to the increased energy requirements for heating and cooling in larger homes.
Similarly, I discovered that energy consumption rises alongside the number of occupants. This phenomenon arises due to the presence of more individuals utilizing appliances and lighting fixtures.
These cause and effect relationships foster a deeper comprehension of how our choices impact energy consumption. For instance, if we aspire to curtail our energy usage, we can opt for smaller homes or limit the number of occupants.
Crosscutting Concept: Stability and Change
Analysis and explication of geoscience data and global climate models reveal that modifications within one Earth system can yield feedback loops, which can either stabilize or destabilize the system.
Throughout my examination of energy usage in residential settings, I ascertained that alterations in a single energy-consuming appliance or behavior can trigger a chain reaction affecting other appliances and behaviors. Consider replacing inefficient light bulbs with energy-efficient alternatives; this simple change can prompt a behavioral shift to turn off lights when leaving a room, subsequently resulting in a substantial reduction in energy consumption.
These feedback loops empower us to comprehend how our choices can influence the environment. For instance, collectively opting for reduced driving can mitigate air pollution and greenhouse gas emissions.
By comprehending the crosscutting concepts of patterns, cause and effect, and stability and change, we can make informed decisions regarding energy usage. These choices enable us to diminish our environmental footprint and forge a sustainable future.
Learn about Crosscutting Concepts here https://brainly.com/question/11153648
#SPJ1
Witch pair of unidentified terms is used to define a ray
A ray is defined by the terms "origin" and "direction." The origin is the starting point or endpoint of the ray, and the direction is the line that extends infinitely in one direction from the origin.
What is a ray?In geometry, a ray is part of a line with one endpoint extending infinitely in one direction. A ray is represented by a single line segment with an endpoint marked by a dot, called the "origin" of the ray.
Are a ray and line the same?No, a ray and a line are not the same. A line extends infinitely in both directions and has no endpoints, while a ray has one endpoint and extends infinitely in only one direction. A ray is part of a line with one endpoint marked, called the "origin," and the other end extends infinitely in one direction, called the "direction."
To learn more about line, visit here:
https://brainly.com/question/30003330
#SPJ1
Match each organ with the germ layer from which it is formed.
The organ with the germ layer is formed Ectoderm, Mesoderm, and Endoderm.
Matching organs with the germ layer from which they are formed:
1. Ectoderm:
Skin (including the epidermis and nervous system): The ectoderm is the outermost germ layer and gives rise to the epidermis, which is the outer layer of the skin. It also gives rise to the nervous system, including the brain, spinal cord, and peripheral nerves. The ectoderm is responsible for the formation of structures such as hair, nails, sweat glands, tooth enamel, the lens of the eye, and the inner ear.
2. Mesoderm:
Bones: The mesoderm is the middle germ layer and gives rise to the skeletal system, including bones and cartilage.Muscles: The mesoderm also forms the muscular system, including smooth, skeletal, and cardiac muscles.Connective tissue: Connective tissues such as tendons, ligaments, and adipose tissue are derived from the mesoderm.Kidneys: The kidneys, along with the urinary system, develop from the mesoderm.Reproductive organs: The reproductive organs, including the gonads, develop from the mesoderm.Blood vessels: The mesoderm forms the cardiovascular system, including blood vessels, the heart, and blood cells.Spleen: The mesoderm also gives rise to the spleen, a part of the immune system.3. Endoderm:
The lining of the digestive tract: The endoderm is the innermost germ layer and gives rise to the epithelial lining of the digestive tract, including the stomach, intestines, and liver.The lining of the respiratory tract: The endoderm also forms the epithelial lining of the respiratory tract, including the lungs.Pancreas: The endoderm gives rise to the pancreas, which plays a key role in digestion and blood sugar regulation.Thyroid gland: The thyroid gland, involved in hormone production and metabolism, develops from the endoderm.Bladder: The lining of the urinary bladder is derived from the endoderm.Tonsils: The endoderm contributes to the development of the tonsils, which are part of the immune system.Thymus: The endoderm also forms the thymus, an organ involved in immune cell maturation.know more about Ectoderm here:
https://brainly.com/question/20704353
#SPJ8
Question 2 of 10
In which two ways do plant cells use the sugar made in photosynthesis?
A. To produce carbon dioxide
B. To make more complex sugar molecules
c. To produce hydrogen ions
D. To store energy for life processes
Answer:
B. To make more complex sugar molecules
D. To store energy for life processes
Explanation:
Photosynthesis is a process that allows plants to use light energy from the sun to make sugar molecules. These molecules are used by the plant to build other compounds, such as proteins and lipids, that are essential for its growth and survival. The plant also stores some of the sugar as starch or other complex carbohydrates for future use. To perform photosynthesis, the plant needs carbon dioxide and water, which it obtains from the air and soil. The plant releases oxygen as a by-product of this process.
Plant hormones are chemical regulators that stimulate or inhibit growth depending on their concentration and type of tissue in which they
are found
STEMS
STIMULATION
ROOTS
LOW
HIGH
HORMONE CONCENTRATION
Based on the information in the graph, which is a correct conclusion about plant hormones?
F. They stimulate maximum root growth and stem growth at the same concentration.
OG. They stimulate maximum stem growth at low concentrations,
OH. They stimulate maximum root growth at high concentrations.
OJ. They stimulate maximum root and stem growth at different concentrations.
Answer:
OJ. They stimulate maximum root and stem growth at different concentrations.
Explanation:
Looking at the graph found in the attachment below, conclusions can be drawn about the effect ofnthe difference in concentration of plant hormones in the two different parts of the plants under consideration, the roots and the stem.p
Considering the roots;
maximum growth of the roots of plants as seen by the upward curve ofbthe arrow, is obtained when plant hormones are at low concentrations. However, with increase in the concentration of plant hormones, the growth of root diminishes as seen bynthe downward slope of the curve.
Considering the stems:
At low concentration of hoeprmones, the growth of stem is very minimal. However, with increase in concentration of plants hormones, a rapid upward shoot is seen in curve indicating a rapid increase in growth. Maximum growth occurs at high concentration of plant hormones.
Therefore, the proper conclusion is that, plant hormones stimulate maximum root and stem growth at different concentrations.
Exponential growth may occur sometimes, but populations never grow that way for very long.
A) True
B) False
It is false that exponential growth may occur sometimes, but populations never grow that way for very long.
Human populace boom is one of the maximum well-known examples of exponential boom due to its archetypical curve. We regularly seek advice from the graph of human populace boom as a “J-curve” due to the letter that so intently resembles its shape.
However, geometrical or exponential boom can't preserve indefinitely. In nature, populace boom have to in the end slow, and populace length ceases to increase. As assets are depleted, populace boom charge slows and in the end stops: This is called logistic boom.
To learn more about exponential growth, click here:
https://brainly.com/question/12101306
#SPJ1
Organic compounds are used as buildings?
Explanation:
your answer is true, organic compounds are used as buildings
Expanded volcanic rock used as a soil amendment is known as _____.
A- Perlite
B- Vermiculite
C- Peat
D- Sand
Answer:
A or B
Explanation
I think it is A or B hope it helps ;-;
Explain how the biosphere receives
phosphorus and nitrogen from the abiotic
realm?
amoeba sisters video recap genetic drift
Answer:
What language is this?...
Which is an advantage that crops may attain through genetic engineering?
Answer: Growing organically
Explanation:
I NEED HELP 50 POINTS!!!
Answer: tatagtacgccc
Explanation:
it’s eventually going to get better dw
A student made a table to show information about the physical structures and organs of birds. What statement best describes how to correct an error in the table?
A. The feathers support the body.
B. The feathers help the bird move.
C. The ovaries produce the eggs.
D. The ovaries produce the sperm.
Answer:
C
Explanation:
i go to flvs too, also, good luck on FSA
A student made a table to show information about the physical structures and organs of birds. The statement which best describes how to correct an error in the table is the ovaries produce the eggs. The correct option is C.
What are the physical structures and organs of birds?Birds are the warm-blooded animals. Their forelimbs are generally modified into wings. They have a well-developed flight muscles which help during the flight of bird. Their hind limbs are adapted for the purpose of walking, hopping, perching, grasping, wading and swimming.
The ovaries produce the eggs. The ovaries are responsible for producing eggs in birds. Therefore, if there is an error in the table that incorrectly identifies the function of the ovaries, it is important to correct it by stating that the ovaries produce the eggs.
Therefore, the correct option is C.
Learn more about Birds here:
https://brainly.com/question/27485869
#SPJ3
Volcanic eruptions can — (1 point)
O draw animals to the area.
O add nutrients to the surrounding soil.
O increase biodiversity.
O drastically alter the ecosystem.
Answer:
Add nutrients to the soil
Explanation:
Plants are destroyed over a wide area, during an eruption. The good thing is that volcanic soil is very rich, so once everything cools off, plants can make a big comeback!
Hope it helped!!!
Answer: Drastically alter the ecosystem
Explanation:
I took the quick check
underwater mountain range
Answer:
What is a mountain range
how long does it take bread and an apple to mold in a bag.
Answer:
Answer 1:It should take around 7-10 days before you will be able to see significant growth on the bread. You could see growth as soon as 5 days depending on the type of bread you used. Remember, fresh bread will mold faster than store-bought bread containing preservatives.
1.1.4 WuizThe Scientific Process
Question 8 of 10
What will a hypothesis become if it is supported by repeated
experimentation?
O A. A control
OB. A prediction
OC. A scientific theory
OD. A conclusion
SUBMIT
Answer:
D
Explanation:
none are correct besides d, d is thr answer
Scarification is a process that scratches up the surfaces of seeds that pass through the guts of birds. A student wanted to see if scarified seeds grew better than those that were not scarified. He simulated scarification by rubbing 20 cherry seeds with sandpaper. Another set of 20 cherry seeds were left alone. The student planted each of the seeds into separate pots and gave them the same amount of water daily. The pots were placed in a location with a constant temperature of approximately 25 degrees C. The number of seeds that germinated each group was recorded daily for three weeks. Which is the control group?
Which is the experimental group?
What is the independent variable?
What is the dependent variable?
Name at least one controlled variable?
Was quantitative or qualitative data collected?
The control group is the set of non-scarified seeds. The experimental group is the set of scarified seeds. The independent variable is scarification process. The dependent variable. is the number of seeds that germinated in each group.
Controlled variables are the amount of water supplied daily, the constant temperature of the growing environment, the type of cherry seeds used and the size of the planting pots.
Quantitative data are the daily count of the number of seeds that germinated in each group over three weeks.
The study does not have qualitative data.
Differences between dependent and independent variablesThe independent variable needs no stimulus to generate results.The dependent variable needs to be stimulated by the independent variable to generate results.A scientific experiment needs to feature all of the elements represented above to be effective and reliable. This is because these elements prove that the experiment was carried out methodically, specifically, and with care in each variable and presented data.
Learn more about science experiments:
https://brainly.com/question/14158846
#SPJ1
The carrying capacity of an ecosystem is
the maximum number of individuals of a
certain species the ecosystem can
support.
Which of the following can change the
carrying capacity of an ecosystem?
A. no change in predator populations
B. habitat loss
C. no change in prey populations
Answer:
B. Habitat loss
Explanation:
We can eliminate "A" and "C" because no change to the predator/prey populations means the ecosystem is unchanged. This means the limiting factors are unchanged, so the carrying capacity will not change either. This leaves "B", which makes sense because less space means fewer organisms can reside in the space.
Please answer this I have to get done fast ! ……………………………………….
Answer:
c) The caterpillar is a herbivore
Explanation:
The caterpillar eats the flower, the frog eats the caterpillar, the snake eats the frog and the owl eats the snake. The is a food chain. If you take one animal out it would affect them all.
What are some ways you can minimize your water footprint?
Answer:
Shower rather than take a bath, and set a timer to keep your shower under 5 minutes.
Explanation:
Only run full loads of laundry and dishes.
Fix leaky taps to reduce water loss.
Use a watering can rather than hose to water your plants.
Install a water butt to catch rain water.
Recycle whenever possible.
Which of these might be considered benefits of climate change? **Select the
two correct responses.**
A. Increased crop growth
B. Fewer business opportunities
C. Increased ocean acidity
D. Increased demand for building construction
E. The spread of invasive species
Answer:
Hi, there the answer is
A.Increased crop growth
D. Increased demand for building construction
Hope this helps :)
Explanation:
For both the plots with the beetles added and the control plots, state the mean tree leaf area per plot that the scientists recorded after running the experiment for 18 months
For both the plots with the beetles added and the control plots. The mean tree leaf area per plot that the scientists recorded after running the experiment for 18 months with the beetles added is 1.7 m², and for the control plots is 2.2 m²
To solve this question, you want to examine the information desk that suggests the tree leaf region according to plot for both the plots with the beetles delivered and the manipulated plots. The implication is the commonality of the statistics values, which can be found by adding up all of the values and dividing by the range of values.
Here are the calculations:
For the plots with the beetles introduced, the mean tree leaf location in step with the plot is:
(1.5+1.6+1.7+1.8+1.9)/5=1.7 m²
For the managed plots, the implied tree leaf region consistent with the plot is:
(2.0+2.1+2.2+2.3+2.4)/5=2.2 m²
To know more about the mean,
https://brainly.com/question/31101410
#SPJ1
Cuál es el órgano más grande del cuerpo humano
Answer:
Explanation:
La piel
Answer:
The skin is often known as the largest organ of the human body. This applies to the exterior surface, as it covers the body, appearing to have the largest surface area of all the organs. Moreover, it applies to weight, as it weighs more than any single internal organ, accounting for about 15 percent of body weight.
Explanation:
a patient of 50 years of age came with proteinuria of 5g in 24hrs.he has no hematuria and his bp is normal.what is the diagnosis?
Answer:
Proteinuria
Explanation:
Proteinuria is increased levels of protein in the urine. This condition can be a sign of kidney damage. Proteins – which help build muscle and bone, regulate the amount of fluid in blood, combat infection and repair tissue – should remain in the blood.
Hope it helps ^^
"With a mix of ice and water present, the surface water must have had a temperature of ______°C, as observed in Figure 3B-1."
With a mix of ice and water present, the surface water depends upon various factors, such as the amount of ice and water present, the amount of heat transfer that occurs, etc.
What is the significance of the temperature?The temperature of the surface water is not determined based on the temperature of the water, but the temperature can be determined based on the initial temperatures of the ice and water and the amount of heat transfer that occurs, etc. So, If the amount of ice is large and there is a significant amount of heat transfer, the temperature of the surface water may be closer to 0 °C.
Hence, with a mix of ice and water present, the surface water depends upon various factors, such as the amount of ice and water present, the amount of heat transfer that occurs, etc.
Learn more about the temperature here.
https://brainly.com/question/11464844
#SPJ1
The occipital lobe in your left hemisphere receives information from:
a. The left side
b. The right side
c. The right eye
d. The left eye
The occipital lobe in the left hemisphere of the brain receives visual information from the
b. right side of the visual field of both eyes.
This phenomenon is known as contralateral processing, where the left hemisphere receives information from the right side of the body and vice versa. The right visual field is processed by the left occipital lobe, while the left visual field is processed by the right occipital lobe. This is because visual information from each eye is transmitted to both hemispheres of the brain, with each hemisphere processing information from the opposite visual field. The occipital lobe is responsible for processing visual information, such as recognizing shapes, colors, and objects, and creating a coherent visual perception of the environment. Therefore, the left occipital lobe plays a crucial role in the processing of visual information from the right visual field.
Learn more about occipital lobe here:
https://brainly.com/question/29768163
#SPJ1
I need help asap please help me I will give brainlist
Answer:it will wither
Explanation:
any parasite will kill living organimes
Which of the following is not a cause of water pollution?
a jet fuel
b laundry soap
c ammonia
d none of the above
Answer:
D) none of the above
Explanation:
took the quiz on edgenudity
The right answer is (a) jet fuel.
What is water pollution?Water pollution refers to the presence or introduction of harmful substances or pollutants into bodies of water such as lakes, rivers, oceans, and groundwater.
These pollutants can come from a variety of sources, including natural and human-made sources. While there are many different types of pollutants that can cause water pollution, some of the most common sources of water pollution include:
Industrial waste: Industries and factories release a variety of pollutants into water bodies, such as chemicals, heavy metals, and organic compounds.
Agricultural runoff: Fertilizers and pesticides used in agriculture can leach into waterways and cause significant pollution. Agricultural runoff can also contain soil, animal waste, and other contaminants that can degrade water quality.
Sewage and wastewater: Sewage and wastewater from homes and businesses contain a wide range of pollutants, including human waste, chemicals, and pharmaceuticals. These pollutants can have serious impacts on aquatic life and human health.
A jet fuel is not typically a cause of water pollution. While spills of jet fuel or other petroleum products can occur and can cause significant harm to aquatic ecosystems, they are not one of the most common causes of water pollution.
The most common causes of water pollution include things like industrial waste, agricultural runoff, sewage and wastewater, and improper disposal of household chemicals and medications.
Learn more about water pollution at:
https://brainly.com/question/19920929
#SPJ7