When I have finished updating the web page, I will relax. Identify the word group above as a fragment, correct sentence, run-on sentence, orcomma splice by selecting one of the answers provided below.A. fragmentB correct sentenceC run-onD. comma splice
Answers
The word group "When I have finished updating the web page, I will relax." turns out to be a correct sentence.
A sentence is a group of words or a phrase that expresses a complete thought or emotion, and this word group has both a subject ("I") and a predicate ("will relax"). It also includes a subordinate clause ("When I have finished updating the web page") that modifies the main clause and provides additional information about the timing or condition of the action or the situation of the scenario.
Therefore, this word group, "When I have finished updating the web page, I will relax." turns out to be a correct sentence and is a complete sentence, and it is grammatically correct.
Learn more about main clause: https://brainly.com/question/19711531
#SPJ11
Related Questions
vital role of maritime english among seaferers
Answers
Answer:
uehgeg7djw7heidiisosowiuisiejei2k
During a construction project, engineers used explosives to excavate 140 feet of tunnel into a mountain. But because of time constraints and environmental concerns, they brought in a tunnel boring machine (tbm) to excavate the rest of the tunnel. The data table lists some observations an engineer made about the length of the tunnel after the tbm was introduced. How much of the tunnel was completed 26 days after the tbm was introduced?.
Answers
The engineer observed that the tunnel was 460 feet long 26 days after the tbm was introduced. Therefore, the tunnel was completed 460 feet - 140 feet = 320 feet after the tbm was introduced.
What is tunnel?
A tunnel is an underground or underwater passageway, typically constructed for transportation purposes. Tunnels are typically used to bypass obstacles such as mountains, rivers, or bodies of water, or to provide a secure route for transportation of goods and people. Tunnels may also be used for mining, research, or military purposes. Tunnels can be constructed using a variety of materials, including steel, reinforced concrete, rock, earth and soil. The length of a tunnel varies from a few metres to several kilometres. When constructing a tunnel, safety is of paramount importance. Special engineering techniques are used to ensure the stability of the tunnel and its construction is closely monitored and regulated. Tunnels are designed to be resistant to weather, vibration, fire, and other environmental factors.
To learn more about tunnel
https://brainly.com/question/29050301
#SPJ4
Utility company power lines carry what kind of current?
Answers
Answer:
Alternating
Explanation:
On axonometric projection, all lines indicating height, width, and depth remain:
a. Parallel.
b. Perpendicular.
c. Convergent.
d. Divergent.
Answers
On axonometric projection, all lines indicating height, width, and depth remain parallel.
In axonometric projection, which is a type of orthographic projection, the lines representing the three dimensions (height, width, and depth) of an object are drawn parallel to each other. This means that regardless of the distance or position of an object in relation to the viewer, the lines representing its dimensions do not converge or diverge.
Axonometric projection is commonly used in technical and architectural drawings to accurately represent three-dimensional objects on a two-dimensional surface. By keeping all lines parallel, it provides a consistent and proportional representation of the object's dimensions.
Learn more about axonometric projection here: brainly.com/question/12937023
#SPJ11
Jess likes to play Mario Bros on the Nintendo Entertainment System (NES). In what
era were these gaming systems first released?
(1 point)
1970s
1980s
1990s
O2000s
Answers
The very first Nintendo Entertainment System (NES) came out in October 18, 1985. So, it would be in the 1980s.
-------------------------------------------
Hope this helps!
Have a great day and God bless! :)
An elastic cable is to be designed for bungee jumping from a tower 130 ft high. The specifications call for the cable to be 85 ft long when unstretched, and to stretch to a total length of 100 ft when a 750-lb weight is attached to it and dropped from the tower.
Determine:
a. The required spring constant k of the cable.
b. How close to the ground a 185-lb man will come if he uses this cable to jump from the tower?
Answers
Answer:
a) The spring constant is 50 lb/ft
b) The man is 26.3 ft close to the ground.
Explanation:
Height of tower is 130 ft
Specification calls for a cable of length 85 ft
the maximum this length stretches is 100 ft when subjected to a load of 750 lb
The extension of the cable is calculated from the formula from Hooke's law
F = kx
where F is the load or force on the cable
k is the spring constant of the cable
x is the extension on the cable
a) The extension on the cable is
x = 100 ft - 85 ft = 15 ft
substituting into the formula above, we'll have
750 = k*15
k = 750/15 = 50 lb/ft
b) for a 185 lb man, jumping down will give an extension gotten as
F = kx
185 = 50*x
x = 185/50 = 3.7 ft
The total length of the cable will be extended to 100 ft + 3.7 ft = 103.7 ft
closeness to the ground = 130 ft - 103.7 ft = 26.3 ft
Discuss on forced convection heat transfer with real examples.
Answers
Answer:
forced convection
Explanation:
When a fan, pump or suction device is used to facilitate convection, the result is forced convection. Everyday examples of this can be seen with air conditioning, central heating, a car radiator using fluid, or a convection oven.
Background
The following skeleton code for the program is provided in words.cpp, which will be located inside your working copy
directory following the check out process described above.
int main(int argc, char** argv)
{
enum { total, unique } mode = total;
for (int c; (c = getopt(argc, argv, "tu")) != -1;) {
switch(c) {
case 't':
mode = total;
break;
case 'u':
mode = unique;
break;
}
}
argc -= optind;
argv += optind;
string word;
int count = 0;
while (cin >> word) {
count += 1;
}
switch (mode) {
case total:
2
cout << "Total: " << count << endl;
break;
case unique:
cout << "Unique: " << "** missing **" << endl;
break;
}
return 0;
}
The getopt function (#include ) provides a standard way of handling option values in command line
arguments to programs. It analyses the command line parameters argc and argv looking for arguments that begin with
'-'. It then examines all such arguments for specified option letters, returning individual letters on successive calls and
adjusting the variable optind to indicate which arguments it has processed. Consult getopt documentation for details.
In this case, the option processing code is used to optionally modify a variable that determines what output the program
should produce. By default, mode is set to total indicating that it should display the total number of words read. The
getopt code looks for the t and u options, which would be specified on the command line as -t or -u, and overwrites
the mode variable accordingly. When there are no more options indicated by getopt returning -1, argc and argv are
adjusted to remove the option arguments that getopt has processed.
would you able get me the code for this question
Make sure that your program works correctly (and efficiently) even if it is run with large data sets. Since you do not
know how large the collection of words might become, you will need to make your vector grow dynamically. A suitable
strategy is to allocate space for a small number of items initially and then check at each insert whether or not there is
still enough space. When the space runs out, allocate a new block that is twice as large, copy all of the old values into
the new space, and delete the old block.
You can test large text input by copying and pasting form a test file or alternatively using file redirection if you are on a
Unix-based machine (Linux or macOS). The latter can be achieved by running the program from the command line and
redirecting the contents of your test file as follows:
./words < test.txt
Total: 1234
Answers
Replace test.txt with the path to your test file. The program will display the total number of words or the number of unique words, depending on the specified mode using the -t or -u options, respectively.
Here's the modified code that incorporates the required functionality:
#include <iostream>
#include <vector>
#include <string>
#include <getopt.h>
using namespace std;
int main(int argc, char** argv) {
enum { total, unique } mode = total;
for (int c; (c = getopt(argc, argv, "tu")) != -1;) {
switch(c) {
case 't':
mode = total;
break;
case 'u':
mode = unique;
break;
}
}
argc -= optind;
argv += optind;
string word;
int count = 0;
vector<string> words;
while (cin >> word) {
words.push_back(word);
count++;
}
switch (mode) {
case total:
cout << "Total: " << count << endl;
break;
case unique:
cout << "Unique: " << words.size() << endl;
break;
}
return 0;
}
This code reads words from the input and stores them in a vector<string> called words. The variable count keeps track of the total number of words read. When the -u option is provided, the size of the words vector is used to determine the number of unique words.
To compile and run the program, use the following commands:
bash
Copy code
g++ words.cpp -o words
./words < test.txt
Replace test.txt with the path to your test file. The program will display the total number of words or the number of unique words, depending on the specified mode using the -t or -u options, respectively.
Learn more about program here
https://brainly.com/question/30464188
#SPJ11
Which of the following is an example of a tax
Answers
Answer:
A tax is a monetary payment without the right to individual consideration, which a public law imposes on all taxable persons - including both natural and legal persons - in order to generate income. This means that taxes are public-law levies that everyone must pay to cover general financial needs who meet the criteria of tax liability, whereby the generation of income should at least be an auxiliary purpose. Taxes are usually the main source of income of a modern state. Due to the financial implications for all citizens and the complex tax legislation, taxes and other charges are an ongoing political and social issue.
I dont know I asked this to
Explanation:
Need help hurry 20 Briefly describe an idea for a new product, while thinking mainly about its cost analysis. Depict what kinds of direct and indirect costs will be involved in its creation.
Answers
Answer: Contaminants can cause tremendous harm to a population; not only humans but entire local animal species can be devastated by poisonous drinking water. Crops and livestock can also be affected. Citizens can make prudent choices regarding natural resources and energy use. Scientists can research and create products that can reduce or eliminate unnecessary waste and pollution.
Explanation:
Convenience items like liquid egg are a lot more expensive?
True
Or False
Answers
Answer:
True
Explanation:
It's just because of the processing
What do organizations install to detect and stop cyberattack threats at the point of attack? a) biometric technologies Oь) spyware malware detection software c) disaster recovery plans d) backup protocols Question 50 (1.67 points) is a large set of nottraditional data that may be used to gain meaningful business insights or predict significant business events a) Business Intelligence b) Hot data c) Big data d) A virtual sandbox
Answers
Organizations install spyware malware detection software to detect and stop cyberattack threats at the point of attack.
To detect and stop cyberattack threats at the point of attack, organizations often install spyware malware detection software. This type of software is specifically designed to identify and remove any malicious software that may be attempting to infiltrate a company's network. By using this technology, organizations can quickly respond to cyber threats and prevent them from causing any damage to their systems or data. Additionally, implementing disaster recovery plans and backup protocols can help organizations quickly recover from any attacks that do occur. As for the second question, the large set of non-traditional data that may be used to gain meaningful business insights or predict significant business events is called big data.
Know more about spyware malware here:
https://brainly.com/question/28910959
#SPJ11
Identify and explain the importance of Security Information and Event
Management (SIEM) .You are hire as a Information Security officer in Evincible
Securities .And you are going to move organization towards (SIEM) .
Answers
Security Information and events management describes an integration of Information and event management in the aspect of organizational security.
With Security Information and Event Management, organizations can effectively manage security logs of events and information using collected and filtered data in other to identify potential risk to networks and systems in real time. Gathered information could be used to create threat alerts and assign different level of priority based on specified rules and conditions.Hence, SIEM could leverage the capability of machine learning models and generated data in other build a robust security system.
Learn more : https://brainly.com/question/25675806
A rectangular brick-lined channel (n = 0.016) of 4.0-m width is laid on a bottom slope of 0.0009. It carries a discharge of 15 m3 /s and the fl ow is non-uniform. If the depth at a Section A is 2.6 m, calculate the depth at section B, 500 m downstream of A, by using (a) only one step, and (b) two steps.
Answers
Answer:
To calculate the depth at section B, 500 m downstream of section A, we can use the Chezy formula:
V = C*R^(1/2)
Where V is the velocity, C is the Chezy coefficient, and R is the hydraulic radius.
a) Using only one step:
Since the flow is non-uniform, the velocity at section B can be assumed to be the same as at section A. Therefore, the depth at section B can be calculated using the same Chezy coefficient and hydraulic radius as at section A.
Hydraulic Radius (R) = A/P = (width * depth) / 2
R_A = (4 * 2.6) / 2 = 5.2 m
R_B = R_A = 5.2 m
Chezy coefficient (C) = (V^2 * n) / (2 * g * R^(1/2))
C = (15^2 * 0.016) / (2 * 9.81 * 5.2^(1/2)) = 1.94
Now we can use the Chezy formula to calculate the depth at section B
V = C*R^(1/2)
V = 1.94 * 5.2^(1/2) = 3.23 m/s
b) Using two steps:
First, we can calculate the velocity at section B using the continuity equation:
Q = A1 * V1 = A2 * V2
15 = (4 * 2.6 * 3.23) = (4 * y * V2)
V2 = (15 / 4) / y = 3.75/y m/s
Next, we can use the Chezy formula and the velocity at section B to calculate the depth at section B:
V = C*R^(1/2)
y = V^2 * n / (C^2 * g)
y = (3.75/y)^2 * 0.016 / (1.94^2 * 9.81)
y = 2.34 m
So, the depth at section B is 2.34 m by using two steps.
Note: The above calculations are based on the assumption that the slope is uniform along the channel and the flow is steady. In practice, other factors such as channel roughness and boundary conditions may also have an impact on the depth of flow.
You have a 12-in. diameter pile that is embedded in the ground 50-ft. The soil is a clay and has a cohesion of 1,000-psf. Determine the Ultimate Pile Capacity, Qult.
Answers
Answer:
hello your question is incomplete attached below is the complete question
answer : 0.75 ( A )
Explanation:
Given data:
12 - in diameter pile
embedded 50-ft
type of soil ; clay
Cohesion = 1000 psf
Determine the Ultimate pile Capacity
cohesion = 1000 psf
hence 1000 psf = 1 ksf (where ; 1 psf = 0.0.001ksf )
form the given table the value of α corresponding to 1 ksf = 0.75
Guys please help me can some one explain me this quesion
Queston "How urban planning can improve public health" ?
Answers
Inadequate nutrition, pollution-associated health disorders and communicable illnesses, poor sanitation and housing conditions, and linked health conditions are some of the primary health concerns caused by urbanization. Hence, a properly planned topography will prevent these negative concerns.
What is Urban Planning?The drafting of plans for, as well as the control and management of, towns, cities, and metropolitan regions falls within the purview of urban planning. It tries to arrange sociospatial linkages at many levels of government and governance.
Urban planning can help to create more livable and desirable communities by designing for walkability, accessibility, and green spaces.
It can help to create more efficient and sustainable communities by promoting the use of public transportation, promoting mixed-use development, and designing for energy efficiency. This can help to reduce greenhouse gas emissions, reduce traffic congestion, and save energy.
Learn more about Urban Planning:
https://brainly.com/question/28893678
#SPJ1
5. Refrigeration refers to space temperatures that are below
What the correct answer?
Answers
Explanation:
The term refrigeration means cooling a space, substance or system to lower and/or maintain its temperature below the ambient one (while the removed heat is rejected at a higher temperature). In other words, refrigeration is artificial (human-made) cooling.
Refrigeration, is the act of removing undesirable heat from one thing, substance, or space and transferring it to another object, substance, or space.
What is refrigeration?Refrigeration refers to the process of chilling an area, material, or system in order to decrease and or keep its temperature below that of the surrounding environment.
Refrigeration, sometimes known as chilling, is the act of removing undesired heat from one item, substance, or area and transferring it to another.
The temperature can be lowered by using ice, snow, cooled water, or mechanical refrigeration to remove heat.
Hence,refrigeration, is the act of removing undesirable heat.
To learn more about the refrigeration, refer:
https://brainly.com/question/13002119
#SPJ2
how much force applied to an object of mass of 3 kg accelraion at 6/ms2
Answers
Answer:
F = ma
=3kg × 6/ms2
=18 N
Explanation:
Since, force is the product of mass and acceleration.
The force applied to an object is
Explanation:
mass=3 kg,
Acceleration=6/ ms2
force=?
Given
force= mass x Acceleration
= 3kg x 6
=18kg N ans
A type of adjustable square that can be used to set, test, and transfer angles is called a
Answers
Answer:
pocket cut
Explanation:
type of adjustable square that can be used to set test and transfer angles. sliding t bevel.
In all vehicles, you can disconnect the electrical connector on the idle speed control system to prevent the PCM
from changing the idle speed.
Select one:
True
False
Answers
The DOT places more restrictions on operators of heavy trucks than on lighter trucks. Why do you think this is?
Only the states can regulate drivers of light trucks.
The drivers of heavy trucks go on long hauls, and therefore are most likely to engage in smuggling and related activities that might pose a national security risk.
The DOT does not actually place more restrictions on operators of heavy trucks.
The DOT is tasked with protecting the safety of people on the roadways, and long hauls pose more such risks.
Answers
The DOT places more restrictions on operators of heavy trucks than on lighter trucks. The reason for this is that "The DOT is tasked with protecting the safety of people on the roadways, and long hauls pose more such risks."
What is the DOT?The United States Department of Transportation (or DOT) is a federal cabinet department of the United States government involved with transportation. It was founded in 1966 and went into operation on April 1, 1967. The United States Secretary of Transportation is in charge of it.
Its goal statement is: "To serve the United States by assuring a rapid, safe, efficient, open, and convenient transportation system that satisfies our essential national interests and improves the quality of life of the American people today and in the future."
Learn more about DOT:
https://brainly.com/question/14329984
#SPJ1
A company wants to develop audio speakers using an inexpensive type of plastic that has a very high quality of sound output. Which customers would most likely give a high evaluation of this product?
Answers
Answer:A
Explanation:
Those who want to save money and will use the product for only a few years
Answer:
THE ANSWER is A - those who want to save money and will use the product for only a few years
Explanation: Got it right on edg 2021
The reading on the 0 to 25 mm micrometer provided is
A. 15.20
B. 15.70
C. 15.45
D. 0.1520
Answers
Based on the image attached, the reading of micrometer is= 15.20.
What do the numbers on a micrometer represent?You will see a line of numbers running down the barrel of your micrometer, starting with the barrel scale. On the barrel scale, each number corresponds to 0.100. Looking at the barrel, 1 equals 0.100, 2 equals 0.200, 3 equals 300, and so on. The distance between each tick mark and the larger numbers on the barrel is 0.025, or 25 thousandths.
Note that micrometer is one that is also referred to as a micrometer screw gauge—is a tool with a calibrated screw that is frequently used for precise measurement of components in mechanical engineering, and others.
Looking at the image, you will see the stop ends at 15 and and 20 so adding them together will be option A. 15.20.
Learn more about micrometer from
https://brainly.com/question/15612200
#SPJ1
Anyone help me please ?
Answers
Answer:
I can help but I need to know what it looking for
what is the part of a drill that holds the drill bit in place is called the ?
Answers
The part of a drill that holds the drill bit in place is called the chuck.
The chuck is a key component of a drill, as it securely holds the drill bit in place during operation. It is typically located at the end of the drill, and can be opened and closed to insert or remove the drill bit.
The chuck is usually operated by either a key or a lever, depending on the type of drill. It is important to make sure that the chuck is properly tightened when the drill bit is inserted, as this will ensure that the bit is secure and will not slip or come loose during drilling.
Additionally, it is important to make sure that the bit is compatible with the size of the chuck, as an improper fit could cause the bit to become stuck or damaged.
Learn more about The chuck: https://brainly.com/question/17206156
#SPJ4
Currently, which is the BEST conclusion one can draw about cybertherapy?
There aren't enough controlled studies to fully assess cybertherapy's impact.
Answers
The BEST conclusion one can draw about cyber therapy is that there aren't enough controlled studies to fully assess its impact. Cyber therapy is a form of therapy that uses technology to treat various mental illnesses.
Although it is becoming more popular, there are not enough controlled studies to assess its full impact on mental health. While some research has shown that cyber therapy can be just as effective as traditional therapy, more research is needed to determine the extent of its usefulness. Therefore, there is still much to be learned about the effectiveness of cyber therapy and its potential benefits and limitations in treating various mental health conditions.
Convenience is one advantage of cyber therapy; You don't have to worry about how you look or what you wear because it is as close as your computer, available seven days a week, 24 hours a day. By saving copies of the messages you exchange, you can also keep a written record of your therapist's advice for future reference.
Know more about cyber therapy, here:
https://brainly.com/question/32270043
#SPJ11
F a black car and a white car are left in the Sun, the black car will tend to be hotter. This is because the black car's surface will _______ more light energy than a white car. 5 points
Answers
Answer:
Absorb
Explanation:
Compared to a white car, a black car is a black object that absorbs light and all colors without reflecting any compared to white. When black objects absorbs all the energy from colors around them they would then become hot, the objects would then release some of this heat energy into the air. So in a nutshell, the black car absorbs all the light that would hit it and then it would convert it to heat
Answer:
absorb
Explanation:
Water at P1 = 200 kPa with a quality of 25% has its temperature raised 20 oC (T2 = T1+20 0C) in a constant pressure process. What is the initial (v1) and final (v2) specific volumes?
Answers
The initial (v1) and final (v2) specific volumes based on the information will be 0.9354 m3/kg.
How to calculate the volumeFrom the information, Water at P1 = 200 kPa with a quality of 25% has its temperature raised 20 oC (T2 = T1+20 0C) in a constant pressure process.
For state 1, v = vf + x vfg = 0.001061 + 0.25 × 0.88467 = 0.22223 m3/kg
State 2 at 200 kPa T2 = Tsat + 20 = 120.23 + 20 = 140.23°C
So state is superheated vapor x = undefined v = 0.88573 + (0.95964 – 0.88573) 20/150 - 120.23 = 0.9354 m3/kg
Learn more about volume on
https://brainly.com/question/27710307
#SPJ1
A luminaire (lighting fixture) that weighs more than _____ pounds shall be supported independently of the outlet box.
314.27
Answers
A luminaire (lighting fixture) that weighs more than 50 pounds shall be supported independently of the outlet box, as stated in section 314.27 of the National Electrical Code.
This means that the fixture should be supported by a separate structural support that can handle the weight of the fixture, rather than relying on the outlet box alone. This is important for safety reasons and to ensure that the fixture is securely installed.A light fixture (US English), light fitting (UK English), or luminaire is an electrical device containing an electric lamp that provides illumination. All light fixtures have a fixture body and one or more lamps. The lamps may be in sockets for easy replacement—or, in the case of some LED fixtures, hard-wired in place.
Fixtures may also have a switch to control the light, either attached to the lamp body or attached to the power cable. Permanent light fixtures, such as dining room chandeliers, may have no switch on the fixture itself, but rely on a wall switch.
Fixtures require an electrical connection to a power source, typically AC mains power, but some run on battery power for camping or emergency lights. Permanent lighting fixtures are directly wired. Movable lamps have a plug and cord that plugs into a wall socket.
learn more about luminaire here:
https://brainly.com/question/24309468
#SPJ11
when assembling various shaped pieces together without marring the workpiece, use a A. chain clamp
B. chain wrench
C. spanner wrench
D. strap wrench
Answers
Answer:
Strap wrench (I think)
Explanation:
The strap doesnt have any rough edges so it shouldn't mark the workpiece (assuming that is what you meant when you said 'marring'). I would recommend to wait for some other answers though since i haven't studied this yet :)